Arinea Wallbox Stellar DC 30–40 kW Charging Station
from PLN 35,900–39,750
The same wall-mounted Stellar format from Arinea, in a lower power band — for a site with a smaller grid connection.
View detailsArinea
Arinea Wallbox Stellar DC 60 kW Charging Station
PLN 57,404–66,098
The Arinea Wallbox Stellar DC 60 kW is a wall-mounted DC fast-charging station rated at 60 kW — an unusual format at this power level, since most DC chargers this size are freestanding pedestals. Wall mounting makes sense where a building already exists with a load-bearing wall near the electrical connection — an underground garage, a car wash, or a service bay, for example — avoiding the foundation a separate pedestal would need. The manufacturer offers the station in three connector variants: a single CCS2, a dual CCS2, or CCS2 paired with CHAdeMO for older Japanese vehicles. Across all three variants the maximum power stays the same — 60 kW — so on the dual-CCS2 variant the two outlets share one power budget rather than doubling it. The station communicates over the OCPP 1.6J protocol and exposes an RS485 output, which eases integration with an external management system. Arinea runs the wallbox.pl shop itself and does not publish a separate datasheet — dimensions, weight, the cabinet's ingress-protection rating and its operating-temperature range are not stated on the product page.
- Current type
- DC
- Power
- 60 kW
- Connectors
- CCS2, CHAdeMO
- Form factor
- Wall-mounted
- Use cases
- Public charging
Arinea Wallbox Stellar DC 60 kW Charging StationPLN 57,404–66,098
Confirmed by source
Specifications
Every row comes from the manufacturer's datasheet or the wallbox.pl listing — sources are listed below.
- Maximum power
- 60 kW
- Current type
- DC
- Connector type
- 1x CCS2 200A / 2x CCS2 200A / CCS2 200A + CHAdeMO 125A
- OCPP version
- 1.6J
- Connectivity
- RS485
- RCD protection
- RCM B, overvoltage
Independent opinion
The EV Compass opinion
What this device is actually good for, and when something else is worth a look.
The Stellar DC 60 kW suits a site where a building already exists with a load-bearing wall near the electrical connection — an underground garage, a car wash, or a service bay — and the buyer wants to avoid the foundation a separate DC pedestal would need. Three connector variants (single CCS2, dual CCS2, or CCS2 with CHAdeMO) let the station match a fleet, though on the dual-CCS2 variant the two outlets share one 60 kW power budget rather than doubling it. An RS485 output and the OCPP 1.6J protocol ease integration with an external management system, which matters for a fleet operator or a commercial car park. Arinea sells the unit directly through its own wallbox.pl shop, but does not publish a datasheet with dimensions, weight, an ingress-protection rating or an operating-temperature range — worth confirming directly with the manufacturer before ordering, especially for an outdoor installation.
Strengths
- Power up to 60 kW enables fast DC charging, far quicker than an AC station.
- Three connector variants — single CCS2, dual CCS2, or CCS2 with CHAdeMO — let the station match a fleet that also includes older Japanese vehicles.
- Wall mounting needs no foundation for a separate pedestal, which simplifies installation inside an existing building — an underground garage, for example.
- An RS485 output and the OCPP 1.6J protocol ease integration with an external charge-management system.
- The model is sold directly by the manufacturer — Arinea runs the wallbox.pl shop itself, with no intermediary distributor.
Better served by another model
If you need datasheets with dimensions, an ingress-protection rating and a temperature range, ABB publishes full documentation for its DC stations — which Arinea does not for this model.
ABB Terra 94 DC Charging StationWhen 60 kW is not enough power for the site, the same brand's freestanding Ultron Slim line reaches higher.
Arinea Ultron Slim DC Fast Charging Station — 60–160 kWIf the station needs to be physically moved between sites rather than permanently mounted, the same brand's portable Ultron Way is designed for that.
Arinea Ultron Way DC Portable Charging Station (CCS, 30–120 kW)
Fleet fit
Cars matched to this charger
Effective power and 10→80% charging time for selected models from our own catalogue.
| Car | Effective power | 10→80% time |
|---|---|---|
 CUPRA Raval VZ (2027) | 60 kW | 36.2 min |
 Toyota bZ4X AWD 73.1 kWh (2025) | 60 kW | 48.3 min |
 Ford Capri Extended Range AWD (2026) | 60 kW | 53.9 min |
 Volvo EX40 Single Motor ER (2026) | 60 kW | 55.3 min |
 VinFast VF 8 Eco Extended Range | 60 kW | 61.4 min |
 Polestar 4 Long Range Dual Motor (2024-2026) | 60 kW | 65.8 min |
 Rolls-Royce Spectre | 60 kW | 71.4 min |
 Lucid Gravity Grand Touring (2026) | 60 kW | 86.1 min |
Worth comparing
Alternatives
Other devices from our catalogue worth weighing before you decide.
Arinea Ultron Slim DC Fast Charging Station — 60–160 kW
from PLN 92,250–164,256
A freestanding DC station from the same brand with a higher power band — for a site that needs more than the wall-mounted version offers.
View detailsDelta DC Wallbox 25kW CCS Charging Station
PLN 72,415.02
Another wall-mounted DC wallbox with CCS, from a different manufacturer — worth comparing the power range and published documentation.
View detailsABB Terra 94 DC Charging Station
PLN 264,826.38
A DC station from an established brand with a full, publicly available datasheet — for a buyer to whom product documentation matters.
View detailsArinea Arteva Mini — Two-station AC charging station 2x22 kW
from PLN 14,755–15,739
If fast DC charging isn't necessary, the same brand's two-point AC station can serve two vehicles at once at a lower investment cost.
View detailsQuestions and answers
Frequently asked questions
Does the Stellar DC 60 kW station have only one connector?
Not necessarily — the manufacturer offers it in three variants: a single CCS2 connector, a dual CCS2, or CCS2 combined with CHAdeMO.
In the dual-CCS2 variant, do both connectors charge at full power at the same time?
The product's own specification lists the same maximum power — 60 kW — for both the single- and dual-CCS2 variants, which points to a shared power budget across both outlets rather than doubled power.
Can the station be mounted on a wall instead of a separate pedestal?
Yes — it is a wall-mounted design meant to be fixed to an existing building wall, with no need to build a foundation for a pedestal.
What management protocol does the station support?
The station supports the OCPP 1.6J protocol and exposes an RS485 output for integration with an external management system.
Does the manufacturer publish the station's dimensions and weight?
No — the product page does not list dimensions, weight or an ingress-protection rating; it's worth confirming these directly with the manufacturer.
Data transparency
Sources
Data collected: August 18, 2026
Configurations
Variants and prices
The variants this device is available in, and their wallbox.pl prices.
| Configuration | Price |
|---|---|
| 1x CCS2 200A | PLN 57,404 |
| 2x CCS2 200A | PLN 63,023 |
| 1x CCS2 200A + 1x CHAdeMO 125A | PLN 66,098 |
Listing details
Additional information
Additional information from the wallbox.pl product page.
- Color
- Black
- Phases
- Three-phase
Shop description
Product description
The original product description from the wallbox.pl listing.
This is a professional 60 kW DC fast charging station, designed for intensive use in public and commercial spaces. Available in three connector configurations—including dual CCS2 or a combination of CCS2 and CHAdeMO—it provides maximum flexibility and compatibility with a wide range of electric vehicles.
The station is available in three connector versions—choose the appropriate one from the options above:
1x CCS2 200A — one charging point, ideal for locations with lower traffic.
2x CCS2 200A — two CCS2 charging points simultaneously, maximum throughput for parking lots and commercial stations.
1x CCS2 200A + 1x CHAdeMO 125A — a combination of connectors ensuring compatibility with both modern European and Japanese vehicles.
Key features and benefits:
60 kW DC power — ultra-fast DC charging significantly reduces vehicle energy replenishment time.
Flexible connectors — available with 1x CCS2, 2x CCS2, or a combination of CCS2 and CHAdeMO, compatible with a wide range of electric vehicles.
Advanced connectivity — supports Ethernet, WiFi, 4G, and Bluetooth, enabling remote control and monitoring of the station.
OCPP 1.6J protocol — full integration with charging management systems and back-end platforms.
RFID reader — secure access authorization using RFID cards or key fobs.
LCD display — clear screen with real-time charging parameters.
RS485 and RCM B — advanced security and integration capabilities with external systems.
Overvoltage protection — comprehensive protection of the electrical installation and vehicle.
Flexible mounting — indoor and outdoor installation.
Technical data:
| Parameter | 1x CCS2 | 2x CCS2 | CCS2 + CHAdeMO |
|---|---|---|---|
| Max power | 60 kW | 60 kW | 60 kW |
| Current type | DC | DC | DC |
| Connector 1 | CCS2 200A | CCS2 200A | CCS2 200A |
| Connector 2 | — | CCS2 200A | CHAdeMO 125A |
| Number of points | 1 | 2 | 2 |
| Connectivity | Ethernet, WiFi, 4G, Bluetooth | Ethernet, WiFi, 4G, Bluetooth | Ethernet, WiFi, 4G, Bluetooth |
| Protocol | OCPP 1.6J | OCPP 1.6J | OCPP 1.6J |
| Authorization | RFID | RFID | RFID |